Conference profile


The International Semiconductor Conference CAS, an IEEE event since 1995, is targeting not only semiconductor electronics, but also micro-and nanotechnologies (including micro-nanosystems).
The plenary sessions are devoted to invited talks giving a broader perspective of the domain, whereas oral and poster sessions contain regular papers, selected by a board of reviewers. Sometimes, oral sessions are including invited papers. A special session is devoted to student papers.
The conference papers are published in Proceedings, available on-line on IEEE Xplore Digital Library.
The main scientific profile is related to:

  • Simulation and fabrication of microstructures and microsystems: surface and bulk micromachining, microengineering techniques, electro-opto-mechanical microsystems, integration of microsensors and microactuators, signal processing, computational intelligence and system interfacing, biosensors and microsystems for biomedical applications; optical, opto-electronic and photonic functional components, RF MEMS (Radio-Frequency Micro-Electro-Mechanical Systems);
  • Science and technology of nanostructures and nanostructured materials: composite nanoparticles and nanostructures with selective properties, nanostructures and nanostructured materials with special properties, nanotechnologies and nanostructures;
  • Semiconductor device physics and technology: device modelling and simulation, silicon and compound semiconductor devices, heterostructures, advanced materials and processes, reliability and defect engineering;
  • Design and technology of microelectronic components: microelectronic, microphotonic and microwave integrated subsystems, devices and modules for power control and conversion, specialized electronic circuits integrated in the microelectronic technology, testing and reliability.
  • Design and simulation of Integrated circuits: OP-Amps and instrumentation amplifiers, LP-LV voltage and current references, Nonliniear  and HV analog circuits, High performance digital circuits, Microprocessors and DSPs, Memories, Data and DC-DC converters, LED drivers, Sensors subsystems and interfaces,Lab on chip, Mixed signals circuits

topics details >

 

Organizing Committee

General Chairman:
Dr. Miron Adrian Dinescu – IMT Bucharest, Romania

Technical Program Chair:
Dr. Mircea Dragoman
– IMT Bucharest, Romania

Technical Program Co-chairs:
Prof. Gheorghe Brezeanu – “Politehnica” Univ. of Bucharest, Romania
Dr. Raluca Müller – IMT Bucharest, Romania

Conference Manager:
Claudia Roman – IMT Bucharest, Romania

Conference Secretariat:
Mihaela Ionita – IMT Bucharest, Romania

Technical Program Committee

Chair: Dr. Mircea Dragoman – IMT Bucharest, Romania

Co-chairs:
Prof. Gheorghe Brezeanu – “Politehnica” Univ. of Bucharest, Romania
Dr. Raluca Müller – IMT Bucharest, Romania

Program Committee members:
Dr. Magdalena Lidia Ciurea – National Institute of Materials Physics, Bucharest, Romania
Dr. Dana Cristea – IMT Bucharest, Romania
Dr. Miron Adrian Dinescu – IMT Bucharest, Romania
Prof. Dragos Dobrescu – “Politehnica” Univ. of Bucharest, Romania
Dr. Alexandru Müller – IMT Bucharest, Romania
Dr. Dan Neculoiu – IMT Bucharest, Romania

 

Honorary Advisory Committee

G.A.J. Amaratunga - Cambridge Univ., UK
C. Anghel – Inst. Superieur d'Electronique de Paris (ISEP), France
N. Barsan - Tuebingen Univ, Germany
S Bellucci – INFN Laboratory Nazionali di Frascati, Roma, Italy
C. Bulucea* - Texas Instruments, Santa Clara, CA, USA (retired)
S. Cristoloveanu - CNRS-INPG-UJF, Grenoble, France
D. Dascalu** - “Politehnica” Univ. of Bucharest, Romania
Daniela Dragomirescu – Univ. of Toulouse; LAAS-CNRS; France
H. Hartnagel - Techn. Univ. Darmstadt, Germany
A.M. Ionescu - EPF, Lausanne, Switzerland
G. Konstantinidis - FORTH Heraklion, Greece
R. Marcelli - CNM, Rome, Italy
S. Melinte - Univ. Catholique de Louvain, Belgium
A. Mocuta - IMEC, Belgium
K. Mutamba - Infineon Technologies, Germany
D. Planson -  Institut National des Sciences Appliquées de Lyon (INSA), France
A. Rusu - KTH Royal Inst. of Technology, Sweden
K. Szaciłowski - AGH Univ. of Science and Technology, Poland
F. Udrea - Cambridge Univ., UK
___________
* CAS Founder Chairman
** CAS Chairman (1998-2016)

 

PAPER REVIEW BOARD (CAS 2021)

Martino Aldrigo                   -IMT Bucharest, Romania
Vlad Anghel                        - ON Semiconductor, Bucharest, Romania
Andrei Avram                      -IMT Bucharest, Romania
Viorel Avramescu                -IMT Bucharest, Romania
Mircea Bodea                      - Univ. POLITEHNICA of Bucharest, Romania 
Mihai Brezeanu                   - PwC Romania, Bucharest, Romania
Valentin Buiculescu             -IMT Bucharest, Romania
Emilian Ceuca                     - "1 Decembrie 1918" University of Alba Iulia, Romania
Magdalena L. Ciurea           - National Institute of Materials Physics, Romania
Dana Cristea                       - IMT Bucharest, Romania
Claudius Dan                      - Univ. POLITEHNICA of Bucharest, Romania
Lidia Dobrescu                   -Univ. POLITEHNICA of Bucharest, Romania
Florin Draghici                    - Univ. POLITEHNICA of Bucharest, Romania
Daniela Dragoman              - Univ. of Bucharest, Romania
Sorina Iftimie                      - Univ. of Bucharest, Romania
Ciprian Iliescu                     -IMT Bucharest, Romania
Alina C. Ion                        -Univ. POLITEHNICA of Bucharest, Romania
Sergiu Iordanescu               -IMT Bucharest, Romania
Botond Kirei                        - Technical Univ. of Cluj-Napoca, Romania
Mihaela Kusko                    - IMT Bucharest, Romania
Ana M. Lepadatu                 - National Institute of Materials Physics, Romania
Romolo Marcelli                  - CNR-IMM, Rome, Italy
Mihai Mihaila                       - IMT Bucharest, Romania
Alexandru Müller                - IMT Bucharest, Romania
Raluca Müller                      - IMT Bucharest, Romania
Florin Nastase                     - IMT Bucharest, Romania
Marius Neag                       -Tehnical Univ. of Cluj-Napoca, Romania
Dan Neculoiu                      - IMT Bucharest, Romania
Alexandra Nicoloiu              - IMT Bucharest, Romania
Raul C. Onet                       -Tehnical Univ. of Cluj-Napoca, Romania
Razvan Pascu                     - IMT Bucharest, Romania
Rodica Plugaru                   - IMT Bucharest, Romania
Gheorghe Pristavu              - Univ. POLITEHNICA of Bucharest, Romania
Munizer Purica                    - IMT Bucharest, Romania
Razvan Puscasu                  - Infineon Technologies Romania, Bucharest, Romania
Antonio Radoi                     - IMT Bucharest, Romania
Bogdan Serban                   - IMT Bucharest , Romania
Dana Stan                          -  DDS Diagnostic, Romania
Ionel Stavarache                - National Institute of Materials Physics, Romania
Gheorghe Stefan                - Univ. POLITEHNICA of Bucharest, Romania
Toma Stoica                        - National Institute of Materials Physics, Romania
Adrian Tulbure                   - "1 Decembrie 1918" Univ. Alba Iulia, Romania
Monica L. Veca                   - IMT Bucharest, Romania
Traian Visan                       - Infineon Technologies Romania, Bucharest, Romania
Rodica C. Voicu                  - IMT Bucharest, Romania
Silviu Vulpe                        - IMT Bucharest, Romania

 

Editors

Gh. Brezeanu   - “Politehnica” Univ. of Bucharest, Romania
M.L. Ciurea       - National Institute of Materials Physics, Bucharest, Romania
D. Cristea          - IMT Bucharest, Romania
M.A. Dinescu    - IMT Bucharest, Romania
D. Dobrescu     - “Politehnica” Univ. of Bucharest, Romania
M. Dragoman   - IMT Bucharest, Romania
A. Müller         - IMT Bucharest, Romania
R. Müller         - IMT Bucharest, Romania
D. Neculoiu        - IMT Bucharest, Romania